PVC insulated single core solid conductors (P) Type P (SRPS N.C3.200) H07V-U (HD.21.3.S2) Rated voltage 450/750V Test voltage 2500V

The conductors consist of a solid copper conductor, insulated with seamless layer of PVC. Constructive-technical data are given in the table below.

According to customers wishes

The condutors are applied during electrical power installations at dry locations, for permanent laying in tubes which may be installed over and under the mortar. Optimal operating temperature of the cable is within the range of -40° C to +70° C. Current electrical load conductor must be adjusted so that the highest temperature must not be less than 70° C.

In coils or on reels.

 

Nominal cross section conductor (mm2)	Insulation thickness (mm)	Maximal outer diameter (mm)	Minimal insulation resistance on 70° C (MOxkm)	Weight (kg/km)
1,5	0,7	3,3	0,011	19,0
2,5	0,8	3,9	0,010	30,4
4,0	0,8	4,4	0,0085	46,2
6,0	0,8	4,9	0,0070	65,7
10	1,0	6,4	0,0070	109,5
16	1,0	7,4	0,0058	170,4